High areal capacity, long cycle life 4 V ceramic all-solid-state Li-ion batteries enabled by chloride solid electrolytes (2024)

1. Trahey, L. et al. Energy storage emerging: a perspective from the Joint Center for Energy Storage Research. Proc. Natl Acad. Sci. USA 1, 12550–12557 (2020).

   Article Google Scholar

2. Lee, Y. G. et al. High-energy long-cycling all-solid-state lithium metal batteries enabled by silver-carbon composite anodes. Nat. Energy 5, 299–308 (2020).

   Article Google Scholar

3. Randau, S. et al. Benchmarking the performance of all-solid-state lithium batteries. Nat. Energy 5, 259–270 (2020).

   Article Google Scholar

4. Chen, R., Li, Q., Yu, X., Chen, L. & Li, H. Approaching practically accessible solid-state batteries: stability issues related to solid electrolytes and interfaces. Chem. Rev. 120, 6820–6877 (2020).

   Article Google Scholar

5. Zhang, Z. et al. New horizon for inorganic solid state ion conductors. Energy Environ. Sci. 11, 1945–1976 (2018).

   Article Google Scholar

6. Bachman, J. C. et al. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction. Chem. Rev. 116, 140–162 (2016).

   Article Google Scholar

7. Park, K. H. et al. Design strategies, practical considerations, and new solution processes of sulfide solid electrolytes for all-solid-state batteries. Adv. Energy Mater. 8, 1800035 (2018).

   Article Google Scholar

8. Balaish, M. et al. Processing thin but robust electrolytes for solid-state batteries. Nat. Energy 6, 227–239 (2021).

   Article Google Scholar

9. Kamaya, N. et al. A lithium superionic conductor. Nat. Mater. 10, 682–686 (2011).

   Article Google Scholar

10. Kato, T. et al. High-power all-solid-state batteries using sulfide superionic conductors. Nat. Energy 1, 16030 (2016).

    Article Google Scholar

11. Zhu, Y., He, X. & Mo, Y. Origin of outstanding stability in the lithium solid electrolyte materials: insights from thermodynamic analyses based on first-principles calculations. ACS Appl. Mater. Interfaces 7, 23685–23693 (2015).

    Article Google Scholar

12. Dewald, G. F. et al. Experimental assessment of the practical oxidative stability of lithium thiophosphate solid electrolytes. Chem. Mater. 31, 8328–8337 (2019).

    See Also

    More life sentences for shooter in fatal LGBTQ+ nightclub attackClub Q shooter sentenced to life in prison plus 190 years after pleading guilty to federal hate crime and gun charges | CNNUmsatzsteuererklärung 2022 / 2.2 Kleinunternehmerbesteuerung | Haufe Finance Office ...Nitrosamine impurities | European Medicines Agency

    Article Google Scholar

13. Schwietert, T. K. et al. Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes. Nat. Mater. 19, 428–435 (2020).

    Article Google Scholar

14. Walther, F. et al. Visualization of the interfacial decomposition of composite cathodes in argyrodite-based all-solid-state batteries using time-of-flight secondary-ion mass spectrometry. Chem. Mater. 31, 3745–3755 (2019).

    Article Google Scholar

15. Banerjee, A., Wang, X., Fang, C., Wu, E. A. & Meng, Y. S. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes. Chem. Rev. 120, 6878–6933 (2020).

    Article Google Scholar

16. Xiao, Y., Miara, L. J., Wang, Y. & Ceder, G. Computational screening of cathode coatings for solid-state batteries. Joule 3, 1252–1275 (2019).

    Article Google Scholar

17. Nolan, A. M., Liu, Y. & Mo, Y. Solid-state chemistries stable with high-energy cathodes for lithium-ion batteries. ACS Energy Lett. 4, 2444–2451 (2019).

    Article Google Scholar

18. Jung, S. H. et al. Li₃BO₃-Li₂CO₃: rationally designed buffering phase for sulfide all-solid-state Li-ion batteries. Chem. Mater. 30, 8190–8200 (2018).

    Article Google Scholar

19. Asano, T. et al. Solid halide electrolytes with high lithium-ion conductivity for application in 4 V class bulk-type all-solid-state batteries. Adv. Mater. 30, 1803075 (2018).

    Article Google Scholar

20. Wang, S. et al. Lithium chlorides and bromides as promising solid-state chemistries for fast ion conductors with good electrochemical stability. Angew. Chem. Int. Ed. Engl. 58, 8039–8043 (2019).

    Article Google Scholar

21. Muy, S. et al. High-throughput screening of solid-state Li-ion conductors using lattice-dynamics descriptors. iScience 16, 270–282 (2019).

    Article Google Scholar

22. Li, X. et al. Air-stable Li₃InCl₆ electrolyte with high voltage compatibility for all-solid-state batteries. Energy Environ. Sci. 12, 2665–2671 (2019).

    Article Google Scholar

23. Park, K. H. et al. High-voltage superionic halide solid electrolytes for all-solid-state Li-ion batteries. ACS Energy Lett. 5, 533–539 (2020).

    Article Google Scholar

24. Kim, S. Y. et al. Lithium ytterbium based halide solid electrolytes for high voltage all-solid-state batteries. ACS Mater. Lett. 3, 930–938 (2021).

    Article Google Scholar

25. Liang, J. et al. Site-occupation-tuned superionic Li_xScCl_3+x halide solid electrolytes for all-solid-state batteries. J. Am. Chem. Soc. 142, 7012–7022 (2020).

    Article Google Scholar

26. Zhou, L. et al. A new halospinel superionic conductor for high-voltage all solid state lithium batteries. Energy Environ. Sci. 13, 2056–2063 (2020).

    Article Google Scholar

27. Kwak, H. et al. New cost-effective halide solid electrolytes for all-solid-state batteries: mechanochemically prepared Fe³⁺-substituted Li₂ZrCl₆. Adv. Energy Mater. 11, 2003190 (2021).

    Article Google Scholar

28. Park, J. et al. Heat treatment protocol for modulating ionic conductivity via structural evolution of Li_3−xYb_1−xM_xCl₆ (M = Hf⁴⁺, Zr⁴⁺) new halide superionic conductors for all-solid-state batteries. Chem. Eng. J. 425, 130630 (2021).

    Article Google Scholar

29. Kato, Y. et al. All-solid-state batteries with thick electrode configurations. J. Phys. Chem. Lett. 9, 607–613 (2018).

    Article Google Scholar

30. Minnmann, P., Quillmann, L., Burkhardt, S., Richter, F. H. & Janek, J. Quantifying the impact of charge transport bottlenecks in composite cathodes of all-solid-state batteries. J. Electrochem. Soc. 168, 040357 (2021).

    Article Google Scholar

31. Liu, H. et al. Elucidating the limit of Li insertion into the spinel Li₄Ti₅O₁₂. ACS Mater. Lett. 1, 96–102 (2019).

    Article Google Scholar

32. Zhang, W. et al. Kinetic pathways of ionic transport in fast-charging lithium titanate. Science 367, 1030–1034 (2020).

    Article Google Scholar

33. Bohnsack, A. et al. Ternary halides of the A₃MX₆ type. Part VI. Ternary chlorides of the rare-earth elements with lithium, Li₃MCl₆ (M = Tb-Lu, Y, Sc): synthesis, crystal structures, and ionic motion. Z. Anorg. Allg. Chem. 623, 1067–1073 (1997).

    Article Google Scholar

34. Zhou, L. et al. New family of argyrodite thioantimonate lithium superionic conductors. J. Am. Chem. Soc. 141, 19002–19013 (2019).

    Article Google Scholar

35. Xue, W. et al. Ultra-high-voltage Ni-rich layered cathodes in practical Li metal batteries enabled by a sulfonamide-based electrolyte. Nat. Energy 6, 495–505 (2021).

    Article Google Scholar

36. Shi, T. et al. High active material loading in all-solid-state battery electrode via particle size optimization. Adv. Energy Mater. 10, 1902881 (2019).

    Article Google Scholar

37. Strauss, F. et al. Impact of cathode material particle size on the capacity of bulk-type all-solid-state batteries. ACS Energy Lett. 3, 992–996 (2018).

    Article Google Scholar

38. Han, F. et al. Interphase engineering enabled all-ceramic lithium battery. Joule 2, 497–508 (2018).

    Article Google Scholar

39. Kubanska, A., Castro, L., Tortet, L., Dollé, M. & Bouchet, R. Effect of composite electrode thickness on the electrochemical performance of all-solid-state Li-ion batteries. J. Electroceram. 38, 189–196 (2017).

    Article Google Scholar

40. Amin, R. & Chiang, Y. M. Characterization of electronic and ionic transport in in Li_1−xNi_0.33Mn_0.33Co_0.33O₂ (NMC333) and Li_1−xNi_0.50Mn_0.20Co_0.30O₂ (NMC523) as a function of Li content. J. Electrochem. Soc. 163, A1512 (2016).

    Article Google Scholar

41. Märker, K. et al. Evolution of structure and lithium dynamics in LiNi_0.8Mn_0.1Co_0.1O₂ (NMC811) cathodes during electrochemical cycling. Chem. Mater. 31, 2545–2554 (2019).

    Article Google Scholar

42. Han, Y. et al. Single- or poly-crystalline Ni-rich layered cathode, sulfide or halide solid electrolyte: which will be the winner for all-solid-state batteries? Adv. Energy Mater. 11, 2100126 (2021).

    Article Google Scholar

43. Walther, F. et al. The working principle of a Li₂CO₃/LiNbO₃ coating on NCM for thiophosphate-based all-solid-state batteries. Chem. Mater. 33, 2110–2125 (2021).

    Article Google Scholar

44. Ohta, N. et al. LiNbO₃-coated LiCoO₂ as cathode material for all solid-state lithium secondary batteries. Electrochem. Commun. 9, 1486–1490 (2007).

    Article Google Scholar

45. Glass, A. M., Nassau, K. & Negran, T. J. Ionic conductivity of quenched alkali niobate and tantalate glasses. J. Appl. Phys. 49, 4808 (1978).

    Article Google Scholar

46. Strauss, F. et al. Li₂ZrO₃-coated NMC622 for application in inorganic solid-state batteries: role of surface carbonates in the cycling performance. ACS Appl. Mater. Interfaces 12, 557146–557154 (2020).

    Article Google Scholar

47. Banerjee, A. et al. Revealing nanoscale solid–solid interfacial phenomena for long-life and high-energy all-solid-state batteries. ACS Appl. Mater. Interfaces 11, 443138–43135 (2019).

    Article Google Scholar

48. Zhang, Y. Q. et al. Direct visualization of the interfacial degradation of cathode coating in solid state batteries: a combined experimental and computational study. Adv. Energy Mater. 10, 1903778 (2020).

    Article Google Scholar

49. Nakamura, T. et al. Guidelines for all-solid-state battery design and electrode buffer layers based on chemical potential profile calculation. ACS Appl. Mater. Interfaces 11, 19968–19976 (2019).

    Article Google Scholar

50. Koerver, R. et al. Chemo-mechanical expansion of lithium electrode materials—on the route to mechanically optimized all-solid-state batteries. Energy Environ. Sci. 11, 2142–2158 (2018).

    Article Google Scholar

Download references